How do I turn salty water into drinking water?

cluckmecoop7

Lovin' The Homestead
Joined
Oct 19, 2019
Messages
80
Reaction score
82
Points
87
Location
Maine
Hi everyone!

I was wondering - incase of an emergency - how do I turn salty river/ocean water into clean drinking water? (Of course, the way can't include electricity in this case. :D)

Thanks!

- Clucky
 

baymule

Sustainability Master
Joined
Nov 13, 2010
Messages
10,920
Reaction score
19,518
Points
413
Location
East Texas
Good question. Maybe pour through layers of sand and charcoal? Make your own boiling pot and distill it?
 

Mini Horses

Sustainability Master
Joined
Sep 2, 2015
Messages
7,787
Reaction score
16,924
Points
382
Location
coastal VA
Boil the water and as the steam is caught and condenses, it will be desalinated. The trick is to catch the steam, so the condensation then collects, not drip back into the boiling pot. You can -- in survival situation -- use a clean rag and wring the water from the steam out. Make a coil at top -- think still. Steam rises, goes into coil, condenses and runs out at end...clean water.
 

Britesea

Sustainability Master
Joined
Jul 22, 2011
Messages
5,676
Reaction score
5,735
Points
373
Location
Klamath County, OR
an old pressure cooker makes a dandy still-- just needs a tube that fits tightly over the release, than coil the tube through some cold water (or ice if you have it) and then into the capturing vessel. Works dandy to make alcohol, I imagine it would work for water desalinization too.
 

cluckmecoop7

Lovin' The Homestead
Joined
Oct 19, 2019
Messages
80
Reaction score
82
Points
87
Location
Maine
Ok, thanks everyone. :) I might even try it to make sure I can do it before something really occurs!
 

Lazy Gardener

Super Self-Sufficient
Joined
May 14, 2017
Messages
4,626
Reaction score
5,884
Points
292
Location
Central Maine, Zone 4B
Set it up with a plastic cover over it, such that the night time temp difference causes condensation on the underside of the plastic. Slope the plastic so that the condensation will run down into a collection container.

you can also make a similar set up to collect dew that settles on top of the plastic laid out on a sloped lawn, or lay the plastic over a trench. The moist soil should give off some moisture that will then condense on the plastic, and can run down into your collection container.

You can make a bucket water purifier with layers of sharp sand in ever finer textures, straw, charcoal. Any water collected from this system should be boiled, just to be on the safe side. But, a well aged system with an active nitrification cycle should render the water safe for consumption.
 

CrealCritter

Sustainability Master
Joined
Jul 16, 2017
Messages
11,215
Reaction score
22,033
Points
387
Location
Zone 6B or 7 can't decide
an old pressure cooker makes a dandy still-- just needs a tube that fits tightly over the release, than coil the tube through some cold water (or ice if you have it) and then into the capturing vessel. Works dandy to make alcohol, I imagine it would work for water desalinization too.

I don't advocate the use of such things, made of stainless and copper and I especially do not advocate the same with inclusion of a thumper.
IMG_20191020_130933.jpg
 
Last edited:

Britesea

Sustainability Master
Joined
Jul 22, 2011
Messages
5,676
Reaction score
5,735
Points
373
Location
Klamath County, OR
My DH just explained what a thumper is (probably not needed for desaliniaztion though). That's a really cool setup there... what kind of proof would you get from that?
This is, of course (cough cough) for making truck fuel, right?
 
Top