lorihadams
Always doing laundry
No problem...it'll give me an excuse to go get my daily dose of vitamin d!
lorihadams said:Okay babe....ready for pic overload?
Here is the tractor...the bottom dimensions are 11'6" x 11'6". No fancy math, we had some 2x12 lumber that had been used somewhere else and by the time we trimmed the ends off that was what we were left with. We had 65 meat chickens in there with extra room.
http://i686.photobucket.com/albums/vv225/lorihadams/capeway pics 2010/100_3769.jpg
The inside is made from 2x2s. We cut the ends at a 45 degree angle and screwed them into each other on both sides and then ran braces along the top edge and cross ways.
http://i686.photobucket.com/albums/vv225/lorihadams/capeway pics 2010/100_4658.jpg
Here is how we attached them at the bottom....we cut small chunks of 2x2s and screwed them into the bottom 2x4 rails and then put the angled 2x2 top piece on that chunk and screwed it into place. You'll need some extra hands to hold everything in place until you get some of the bracing in place so it won't move.
We put 2x4 pieces in the corners to brace it too as well as putting a 2x4 down the center of the whole thing to help keep it strong. We also put 2x2 braces on the end triangle to help frame it up.
http://i686.photobucket.com/albums/vv225/lorihadams/capeway pics 2010/100_4659.jpg
Now for the door. We got a screen door hardware kit with a spring and framed up the opening to create braces to attach the door, also made from 2x2s. Here is a pic from the inside looking out.
http://i686.photobucket.com/albums/vv225/lorihadams/capeway pics 2010/100_4660.jpg
We attached chicken wire all the way around the bottom with staples. The next layer up is overlapped and secured with zip ties in the open spaces and stapled to the 2x2 pieces. Go up as high as needed and then lay the tarp over the whole thing. We completely covered one side and 3/4 of the end. We just folded it and stapled it down so it was smooth. It won't be perfect. On the top of the tarp we screwed in additional 2x2s to help keep it in place cause we get some strong wind gusts up here.
We bolted some wagon wheels on the ends and voila!
Here's everybody in the tractor at 3 1/2 weeks old.
http://i686.photobucket.com/albums/vv225/lorihadams/100_3795.jpg
I was thinking the same thing, but I figured she got all the measurements and pics and everything and I was happy so I wasn't going to criticizeglenolam said:Those kids looking at the chickens look a lil big for 3 1/2 weeks!?!